T Printer Stand

The Printer Stand is recommended where a maximum height printer system configuration is needed. The printer will reside approximately at table height. The duplex unit must be directly under the printer for any configuration. All paper handling options must be below the duplex unit. The bottom of the printer or the duplex unit must be < 1.5 inches above the top surface of the printer stand.
- The duplex unit must be directly under the printer for any configuration. All paper handling options must be below the duplex unit.
- The 2000-Sheet Drawer must be at the bottom of the stack of drawers.
- The bottom of the printer or the duplex unit must be < 1.5 inches above the top surface of the printer stand.

Lexmark T Printer Stand, - T520 - Optra T520d - Optra T520dn - Optra T62x Series - T63x Series - X522 MFP, 1.03 oz (29.1 g), 22.4 x 259.6 x 31.5" (569 x 6594 x 800 mm), 24 x 26 x 39" (610 x 660 x 991 mm), 1.2 oz (34 g), 1 pc(s)